And, since they're not the most exciting product to shop for, we've saved you the trouble of searching for the surge protectors that are worth your while. See It Surge energy: 2,880 joules Clamping voltage: 400 volts Mounting holes: Yes Outlets: 10 Cord length: 8 feet Dimensions: 2” x 5.25" x 12"If you're buying a surge protector for your valuable electronics, you'll want to get one that's going to help you cover as many of them as possible.
It boasts 10 outlets, with six packed together and four spaced out, letting you keep large power bricks away from the bunch, so you can actually use all the plugs. The surge protector is built to handle 2,880 joules over its lifespan, which should help you get plenty of use out of it. See It Surge energy: 4,500 joules Clamping voltage: 400-500 volts Mounting holes: No Outlets: 8 Cord length: 6 feet Dimensions: 3” x 1.14” x 11.75”You may want to protect your most precious and expensive electronics with a premium surge protector, but none of us are going to get the best surge protectors and put them on every outlet around our house.
Where you just want to add some extra outlets and give your gadgets some added protection, the AmazonBasics 8-Outlet Power Strip SurgeProtector can get the job done for less than $20. This surge protector offers an impressive 4,500 joules of surge suppression, so it should last you a good long while, letting you get extra value out of the purchase. See It Surge energy: 1,710 joules Clamping voltage: 330 volts Mounting holes: Yes Outlets: 6 (3 USB) Cord length: 3 feet Dimensions: 2.49” x 14.2” x 1.48”If the last piece of your smart home puzzle is a voice-controlled surge suppressor with its own mobile app, then the Kasey Smart Wi-Fi Power Strip is just what you’re looking for.
Using the mobile app, you can also group plugs and command them as a unit, and you can create scheduled events to toggle devices, or use IFTTT for additional programmability. Each outlet gets its own recessed button to turn it on or off. The Pivotal arranges four outlets in standard spacing down the middle and then four more on each side that can also pivot up to 90 degrees.
It also features a convenient cable trap, so you can thread most or all of your cords through a channel at one end, keeping everything tidy. It also includes coax and DSL/telephone port walkthroughs. The Pivotal doesn’t have a reset table circuit breaker, but it offers a beefy rating of 4320 joules.
See It Surge energy: 1,050 joules Clamping voltage: 400 volts Mounting holes: No Outlets: 2 Cord length: n/a Dimensions: 3.5” x 2.5” x 1.75”If you’re a frequent traveler, the gear you take on the road is probably unprotected. It’s a compact two-outlet surge protector that has a fully retractable three-prong plug for easy packing, and features a pair of outlets along with DSL/telephone sockets. Tripp Lite managed to pack 1050 joules of protection in this small package, but be aware that it will eventually fail with a closed circuit, so keep an eye on the status light.
See It Surge energy: 4,320 joules Clamping voltage: 330 volts Mounting holes: Yes Outlets: 12 Cord length: 6 feet Dimensions: 1.3" x 5" x 12.3”APC’s P12U2 is a go-to option for people who have a lot of things to plug in. The power cable also has a rotating shoulder, so you can orient it in any direction without bending or kinking the cable. It has a respectable rating of 4,320 joules, but like the other APC on this list, how it handles the loss of surge protection is a little dicey.
The surge suppressor may cut off current to your equipment, or let it continue to flow with an indicator in the status light, depending upon how the Move fail. The aesthetics may be lost if you keep your power strip behind furniture, but it’s hard to deny the beauty of this polished aluminum case with elegantly beveled edges and braided power cable. Otherwise, this is a pretty typical surge protector, though its eight outlets are generously spaced to accommodate oversize plugs.
Austere’s rating of 4,000 joules should last longer than similar models, though when it eventually fails, it’ll continue to power your gear. See It Surge energy: 1,500 joules Mounting holes: No Outlets: 8 (6 USB) Cord length: 6 feet Dimensions: 2” x 5.25" x 12"Sometimes a standard power strip can get pretty cramped when you've got a lot plugged into it.
A tower-style surge protector can help ensure the things you plug into it don't get in the way of one another, and the Bested Power Strip Tower is a phenomenal option. This tower also features six USB ports on the corners, and each can offer up to 2.4 amps depending on what the device on the other end of the cable supports.
See It Surge energy: 1,445 joules Battery Backup: 1500VA/1000W Mounting holes: No Outlets: 12 (2 x USB) Cord length: 5 feet Dimensions: 11" x 14" x 3.9”With an uninterruptible power supply (UPS) you're protecting your devices differently. I’d recommend using a suppressor that opens the circuit when the Move eventually fail, so your equipment isn’t left unprotected.
The downside is your stuff may power down unexpectedly, and you’ll have to buy a new surge suppressor to get back in business. The clamping value, in contrast, measures how much voltage gets through during any single spike, where a lower number is better for your gear.
You might want to find a model that spaces outlets far apart or uses some sort of pivoting system to let you fit oversized plugs on the strip. The find print can be onerous, and I guarantee you’ll never collect money over an equipment failure that resulted from a surge -related problem.
After 100+ hours of research & testing, we’re comfortable recommending the EATON CHSPT2ULTRA as the best whole house surge protector for your dollar due to its’ universal compatibility, notification features and ease of install. Our original pick when first conducting tests was the Siemens FS140, but after the release of the 3rd edition of the CHSPT2ULTRA, we’ve since revised our top recommendation.
It’s equipped with really bright LED lights to notify you of your power’s status. Universally connects to any manufacturer’s breaker box and defends all electronics in the home.
You may need to purchase a new 50 amp double poles (ganged) circuit breaker that fits your electrical panel. Some wires are very short, making it difficult to connect to the 50 amp breaker and/or the neutral and ground bars.
The Eaton CHSPT2ULTRA is a highly popular Type 2 SPD, even earning the title of “Amazon’s Choice.” It is a great value for the price, considering all of its unique features and outstanding efficiency. The installation process is quick and easy and the device’s functionality is fairly straightforward.
If your rental property has a larger breaker and is equipped with #14 wire, then the Eaton CHSPT2ULTRA is the ideal choice for you. Keep in mind that you may need to purchase another circuit breaker to make sure the SPD fits your power panel.
All in all, this SPD is an excellent choice for your rental property when factoring in budget and reliability. Customer service is attentive and knowledgeable, allowing you to handle installation with ease.
Keep in mind, however, that a service technician is recommended to install the SPD unless you are completely comfortable handling wires and electric panels. Although, with a basic understanding of electricity, you should be able to follow the installation instructions with no problem.
It also offers a minimalistic appearance despite its size. It has three types of commercial class notifiers: an audible alarm, LEDs for status updates, and a flashing red LED to notify you when the electric service or wiring is compromised This device is definitely on the pricier side, but it works like a charm and many consider it “the Rolls-Royce of PDS.” It’s quite large and may be difficult to fit under your breaker box. Siemens is a trusted, well-known brand that will surely keep your property and your appliances protected.
With a variety of visual alerts, you will always know the current status of your power. If you don’t want to rely on LEDs alone, this SPD is great because it also has an audible alarm for notifications.
This product takes all the guesswork out of knowing when it is time for equipment to be replaced. It’s the perfect replacement for low voltage surge and lightning arrestors, which became obsolete around 2009.
The device mounts external to electrical distribution equipment and is designed to connect and protect 120/240-Volt single or (split-phase) panels. The fuse box is a bit larger than the average one, so finding the right place to put it may be tricky.
While this is a solid product, it definitely isn’t as reliable as its brother, the Siemens FS140, which offers a variety of features and notifiers. However, it does effectively protect your devices and is the perfect replacement for old lightning arrestors that were common in the 2000s and earlier.
It’s compact, sleek, and discreet, meaning it saves space and blends seamlessly with your breaker. The removable modules add increased flexibility to the device’s functionality.
It has removable modules (cable, Ethernet, and telephone) that allow quick and easy installation customization. The product’s modules may be difficult to locate, but the instructions are very well-written and easy to understand.
It might be a bit too big to install on your own, depending on your handiness skill level. This SPD by Schneider is sleek, compact, and minimalistic and offers optimal protection for every electronic in your rental.
It is super easy to install; only requiring you to use a few screws and snap the modules into place. The device also offers amazing flexibility for functionality and application, allowing you to customize the SPD any way you want.
For 200 bucks, you can adequately protect your property and elongate the service life of all your gadgets and appliances. It’s a lot cheaper than replacing entire appliances or electric panels.
There is a green LED to show the device’s status and ensure proper protection. The Square D HEPD80 device by Schneider is one of the most affordable PDS on the market, and it doesn’t compromise quality.
You can have peace of mind with the HEPD80 device since it is UL 1449 certified and CSA 3rd Edition Type 1 SPD approved. The strong metal design makes the product increasingly durable and reliable.
It has real-time visual indicators for diagnosis of suppression and power status for all the device’s phases. The one thing about this SPD is that you do need to use it inside, unlike other PDS on this list that can be used both indoors and outdoors.
It also has permanent mounting feet for secure placement by your breaker panel. Some people consider this SPD to feel a bit cheap and flimsy, but for the price it gets the job done.
The NEA ratings for this product are a bit low compared to other PDS on the market. This Panel Guard against Informatic is a Type 2 SPD that adds extensive coverage to the appliances and devices in your rental property.
The NEA rating on this product is a bit lower compared to other SPDs, and it isn’t the best quality in terms of design, but it gets the job done, and it’s cheaper than replacing equipment. Comes with 2 USB ports, 3 fixed and 3 swiveling power outlets.
Provides you with 6 different outlets and 2 USB ports, perfect for every tech user out there. There are two indicator lights at the top of the outlet that let you know if your devices are grounded and protected.
Besides the status notifications, the SPD also has an LED strip light that glows red when it is plugged in. Many people complain that the light is bothersome, especially if you place multiple power strips in the same room.
A lot of people make the mistake of only putting Type 3s in their homes, but those PDS should be strictly supplemental. It provides great surge protection for mobile devices and has 6 different power outlets as well as 2 USB ports.
The lights also let you know if the plugged in gadgets are grounded and protected, although some people do complain that the strip on top is always lit up. However, it’s a great product and a very adequate charging station for all your tenant’s electronic needs.
Most homes in the United States are equipped with basic 120-volt power outlets. They have two parallel rectangular slots and a round hole for the ground wire.
Most outlets are “duplex” receptacles, with two places to plug in electrical devices. Larger appliances may need 240 volts of power; outlets for these machines tend to be configured differently to accommodate them.
A home with standard 120-volt service can be adequately protected with an 80kA-rated surge protector. The PR represents how much voltage is still let through to your property’s equipment after the surge protector has done its job.
The MCO is probably the most important factor to consider when evaluating a whole home surge protector for your rental. The National Electrical Manufacturers Association (NEA) enclosure type.
A typical NEA enclosure might be rated to provide protection against environmental hazards such as water, dust, oil or coolant or atmospheres containing corrosive agents such as acetylene or gasoline. Of course, you will want to know what type of warranty is offered for the whole home surge protector you choose to make sure you will be covered in the future.
Look for a product that provides the most protection and features for a price that fits your rental business budget. Type 1 PDS are installed on the “line side” of your main service entrance, between the utility pole and your power meter, right where electricity comes into your property.
The main drawback of these whole home surge protectors is that the power company has to get involved with installation. As society and technology continue to advance, residential properties are in more need of whole home surge protection today than ever.
While power surges can sometimes happen because of lightning strikes, they usually occur because of internal malfunctions. 80 percent of surges come in short, intense bursts and primarily caused by the device users.
It’s rare for transient surges to make the property’s entire power go out or break a whole appliance, but they do add up over time and degrade electronics’ performance. Power surges tend to happen in machines like AC units and appliances, so you may be wondering why you need a protector for the whole house.
The answer is simple: a whole homesurgeprotector will block the surges from affecting other devices in the property, thereby protecting every outlet and all the wiring. By redirecting the power surge to the breaker panel, the whole homesurgeprotector will defend all aspects of your rental’s electricity.
To have a professional install it, you’re looking at spending a couple extra hundred dollars. However, the lifespan of your surge protector heavily depends on how many surges run through your house every day.
The coating that absorbs the extra voltage, the metal oxide variety, wears off with each absorption. Not only does their surge protector come with different voltage options and LED lights for easy notifications, it’s relatively cheap, costing around $110.
There are cheaper surge protectors, but EATON’s offering doesn’t sacrifice quality for the price, making it our best rated surge protector. Whole home surge protectors do improve the chances of your electronics making it alive out of the storm, however, so they’re still worth the investment.
Some surge protectors require stand-alone circuit breakers to function properly. You also need to find out the impedance of the circuit breaker and surge protector in order to determine compatibility.
The main difference between a surge protector and a power strip lies in how well they protect connected devices. A surge protector uses a metal coating to absorb any extra voltage and electricity that pass through.
The EATON CHSPT2ULTRA Ultimate Surge Protection 3rd Edition is the best whole homesurgeprotector on the market, in terms of value and quality, according to our product experts. With 4 different voltage modes, LED notifications and an easy-to-install mounting panel, the EATON Ultimate 3rd Edition offers the best bang for your buck while maintaining quality.
The average surge protector costs around $150, and unless your house experiences major power surges every day, you don’t need to spend more than that. Whole home surge protectors work by absorbing any extra voltage through a metal coating–metal oxide variety, to be specific.