But when it comes to zoning central heating and air systems, things get trickier. Larger, newer homes often have multiple systems connected to different ductwork.
Installing dampers inside your ducts is the most common way to add zones to an existing system. Now you're sending cool air back into the return, which makes your evaporator coil get colder.
Even when you're cooling your entire house, the bypass duct will siphon air from the supply. Basically, you'll end up with two zones, but you'll also lose efficiency and put more wear and tear on your equipment.
Unlike standard, “one-speed-fits-all” equipment, variable speed systems match the cooling or heating load for a given zone. In other words, you won't have to worry about excessive static pressure in your ductwork.
All in all, opting for variable speed equipment is the best way to optimize value and comfort when adding zones: However, they won't need to add a bypass duct since the equipment sends a smaller volume of air when a zone calls for it.
That way, your equipment will be capable of responding to calls from different zones and meeting the cooling or heating load. You'll also enjoy all the efficiency and comfort gains from variable speed equipment, including longer, more consistent heating and cooling and better dehumidification during the humid months.
Zoning is a way to control your HVAC system to maximize heating and cooling output. It utilizes multiple sensors, thermostats, and modulating dampers to more effectively control the temperature in different “zones” within your home.
Without it, you may have to blast the air conditioner to keep the upper floors in your home cool while the unoccupied basement stays nice and chilly. The ability to transfer some of that cold basement air to the occupied rooms of your home saves energy.
For example, Dad can stay cooler in the upstairs office without the baby’s room becoming an icebox during her nap. Less wear and tear on the system: A zoned HVAC system doesn’t have to work as hard and therefore can last longer, saving you money on repairs and replacements in the future.
With a zoned system, one unit provides heating and cooling to multiple areas of your home. Unless you have a reason for having two completely separate systems (e.g. your basement or second story will be a rental unit with a tenant who would like control over their thermostat), a zoned system is generally more cost-effective in terms of both installation and maintenance costs.
My service tech Matt was friendly, informative and very knowledgeable. ” Very courteous, economically priced for HVAC furnace repair work.
They have an amazing team that toucan truly trust and count on to get the job done right! A zoning system is a type of HVAC control that utilizes multiple zone sensors, thermostats and modulating dampeners to more effectively control temperatures throughout your home or office.
The result is a dual zone air conditioning system capable of providing different temperatures throughout your house. Dual zone heating and cooling isn’t just for the rich and famous anymore, it’s a solution to households with multiple stories, high energy bills and is more affordable than you might think.
Toucan think about a zoning system as being somewhat similar to having a few different air conditioners hooked up to your home or office, each set to your desired temperature for that respective area. Except the great part about a zoning system is that all of these areas run off of the same air conditioner.
A dual zone system instead relies on dampeners (which are kind of like the air flow nozzles in your car), which close partially or fully to redirect air floe through different areas in your house called “zones.” This method of HVAC control can save significant amounts of money on your energy bill, particularly if you have areas that get used less often and require less air conditioning or heating. The cost of a dual zone system depends on your HVAC contractor, but a ballpark figure would be around $2,500-3,500 if it is done during an installation, depending on the size of your house and your area.
This might seem price, but people who have installed dualzoneHVAC systems have reported close to a 30% decrease in energy costs. If you live in Santa Clarita, California then you know that with a 30% reduction in your air conditioning cost, then your dual zone system will likely pay for itself in five or six years.
All Systems Mechanical specializes in the installation and servicing of all makes and models of thermostats and HVAC control units, including dual zone air conditioning systems. We can custom tailor a system specialized for your needs, ensuring your comfort for decades to come.
Try our online calculator; click the tab on the top of this page for more information. By submitting this form, you consent to receive a call, email, or text from a specialist who may utilize auto-dial technology to contact you, even if the number you provided is on a do not call registry.
Your specialist will listen to you, understand your current situation, and provide your consultation at no obligation. A representative from Next Gen Air (BBB A+ rated) will be calling you shortly to confirm your appointment.
The idea of being able to independently control the temperature within various areas of the home based on need and occupant preferences is becoming increasingly popular as a way of improving home comfort and reducing energy costs. This can lead to battles over the thermostat as various family members try to adjust the temperature to their liking.
The only option for controlling the temperature in different parts of the house is to close the vents manually. Unfortunately, this reduces airflow, which can ultimately strain and shorten the life of your HVAC system.
A professionally-installed zoned HVAC system uses a series of dampers and separate thermostats for each area of the home. You no longer have to pay to heat or cool the basement or upstairs bedrooms when they are not being used.
The first key component of a zoned HVAC system is a series of motorized dampers. Each zone has its own thermostat that controls the heating and cooling operation in that area.
As each area of the home reaches the set temperature, those dampers are closed. When all sections of the home are at the desired temperature, the entire system shuts off.
The fact that toucan shut down heating and cooling to unoccupied areas of the home can significantly reduce operating costs. The system cannot deliver enough air to a small area to allow the equipment to cycle properly.
Although installing zoned AC & furnace units is relatively straightforward, it is certainly something that should be left to a professional. Call today to find out more about the benefits of a zoned HVAC system.