logo
Archive

Ehsan Ziya

author
Ava Flores
• Monday, 17 January, 2022
• 24 min read

Before I forget, I also like learning new ways to create music, sounds and visuals. Our corporate office is located at an 11 acre processing facility in Riverside, California just 55 miles east of downtown Los Angeles.

genius
(Source: genius.com)

Contents

Read More His first stop was Seattle, Washington where he lived for nearly three years acclimating to his newfound country while studying its language and culture. In 1996, he enrolled in The University of Las Vegas Nevada where, two years later, he would receive a Bachelor of Arts degree in Hotel Administration.

His acquisition of the Riverside facility and others has solidified Dance’s presence as one Southern California’s premier scrap metal processors. He grew up in the City of West Linn, Oregon, a tiny paper mill town on the Willamette River just 12 miles south of Downtown Portland.

Read More The youngest of six children raised by Robert & Harriet Lehman, Josh’s trading spirit was groomed at an early age selling ladies shoes for Nordstrom department stores years before his graduation from West Linn High School. He was ultimately promoted to Director of Purchasing for the Western Region of North America where he thrived before he accepted his current role at Dance in July 2019.

As the Executive Vice President of Dance Enterprises, Josh’s main focus is maximizing overall operating performance while insuring that each financial goal is met. He is a seasoned veteran of the industry with nearly 30 years of metal trading experience, 20 of which spent dealing with his good friend and owner of Dance Enterprises, Mr. Daniel GAO.

Their combined knowledge of the scrap metal industry along with their passion for the business itself remains the driving force of this growing company. Dance’s multiple yards and processing facilities along with a global network of consuming mills and markets allows us to offer top pricing on all sizes, shapes, types & grades of metals.

ziya ehsan divar sep records artwork
(Source: soundcloud.com)

Installed this package on a Windows 10 Home PC running Matlab 2020a. After successful installation, the hardware setup app does not run with the error: “Error launching Hardware Setup workflow TI C2000 for base code TIC2000.

But nothing worked and my simulation is getting stopped suddenly while it is running with hardware. MOUSTAFA SOLOMON: The support packages have been updated to fix the issue.

You can try installing the latest version of support packages. Miriam Martinez Lopez: You can try out the latest version CCSv10.

The CCS path you need to provide for validation should be the parent directory of 'CCS_base' folder. You can find the 'Linker command file' option for editing or including the .cmd file in Configuration parameters Hardware Implementation Target hardware resources Build options.

I am unable to download this package, it says to contact technical support. Venkatesh Cheaper thank you for your time, but I am not using a launchpad so your advice is not worked for me.

snowdon ehsan ziya divar dasha fedorova records aug artwork
(Source: soundcloud.com)

My card was designed for a specific control unit and I want to use for my job now. I am unable to download this package, it says to contact technical support.

Simulink Support Package for Arduino and C2000 could not install at the same time Hello, I got this message when I am trying to run my model in external mode.

There is no problem @ building and downloading the code to hardware but I want to change some parameters dynamically while the simulation is running. Error occurred while executing External Mode MEX-file 'ext_comm': Failed to connect to the target.

Hello, I have F28069M and I installed the support package but cannot find blocks for F298069M or F2806X in the Simulink library Can you help me? But running into “The support package is not compatible with your version of MATLAB or operating system” error.

When I'm building a sim link project with matlab2019a, The report prompts the following errors Contents of not reusable because: The following block contains an S-Function that does not conform to Code Reuse restrictions.

rez ehsan 1397 ziya ago
(Source: www.radiofaryad.com)

Hi, I am currently using MATLAB2018b, and I am working on TI's TMS320F28069 processor and embedded code generation. I came across with a problem with the EPM module; normally in C code you can trigger the Trip zone Event with the software by writing the Trip-Zone Force Register (TZ FRC) but I can't find that feature on Simulink EPM module.

Depending on which processor you select in the installation setup steps we will ask you to point to C2000Ware or controlSUITE or both. We kept using controlSUITE for old processors as we didn't see a need to upgrade and the change was significant and error prone on our side.

Lilian Ham pp: I would advise to use the recommended version of C2000Ware (in your case 1_00_06_00). TI often changes names of registers which could create mismatches with the code we generate.

Upgrading to the latest version just creates risks, and I can't think of added benefits unless you use custom code to access new functionalities that they added in the latest version. On a separate note, it is safer and more beneficial to upgrade to the latest version of the compiler as TI regularly fixes bugs and maintains good backward compatibility with older versions.

Recently, control suit change its name as C2000ware, and its folder structure has been changed. So, when I'm setting Control suit installation folder. It shows a hardware setup error:the folder...is not a Texas Instruments controlSUITE parent directory. I had tried to use 'long double' data type following the tip which you commented before(15 Sep 2017).

(Source: www.youtube.com)

But in my case, it shows some errors during the building process as follows: This problem occurs due to the way TI has re-arranged it's folders starting from CCSV9.

Add-on: Embedded Coder Support Package for Texas Instruments C2000 F28M3x Concerto Processor version 18.2.2 Error while Hardware setup: the “gear” icon process. “Validate Code Composer Studio Installation” is failing with the following warning dialog Error Dialog: “The folder, C:\ti\ccs901, is not a TI CCS Parent directory.

I tried uninstalling CCS and installing the latest version. Antonin Aditya Padmanabha Thank you for suggesting the solution, it does work with come special configurations.

With “TI C28x” configuration in the referenced model, I found the generated project code could be compiled successfully even with “Software environment” set to “Shared location”. I guess that the error(“Path must start with relative path to anchor (Component: Simulink | Category: Block diagram error)”) in the code compiling stage may be related to the setting of “Code replacement library”.

Hi I am currently using Matlab R2017a because of compatibility issues with another Program. After clicking the download button in the Add-On Explorer, a blank window appears and nothing happens.

flowers ziya divar ehsan ep genius atour released jun records soundcloud
(Source: soundcloud.com)

While this is being investigated here is a workaround that may help you resolve the problem: Go to the configuration parameters of the model under Code Generation - Interface - Software environment and select “Auto” for Shared code placement instead of “Shared location”. Armin Siemiatkowski: On your R2016a MATLAB window, go to Add-ons tab, Select Manage Add-ons, Browse for the TI C2000 support package, and Install the support package from there.

For the right side of Embedded coder support package of TI C2000 in the Add-On list click the Gear icon for setup. Linda die: You can download the support package in a separate machine with Internet and install that offline in different machine without internet connection.

I am running R2018b and have the Embedded Coder Support Package for Texas Instruments C2000 Processors installed. When trying to generate code for my model I still get this error: CRL: “TI C28x” cannot be found in the registry.

I encountered a Model Reference problem when trying this Support Package using MATLAB R2019a to develop a TI Piccolo F28069M application. If a referenced model introduced, then an error arose saying “Path must start with relative path to anchor (Component: Simulink | Category: Block diagram error)” during the Code Generation process.

I wonder how to solve the problem since I prefer Model Reference in the development. @ Zika : Please pick the GPO block under C2833x device in Simulink library browser under C2000 support package.

acton ehsan ziya divar amirreza hosseini oct records artwork
(Source: soundcloud.com)

And I am trying to use an Output GPO block for c2833x processor but when I build the model encounter with this error below. ### Build procedure for model: 'untitled' aborted due to an error.

I have already installed “Embedded Coder Support Package for ti C2000 processors” but I can not see it in the Simulink Library Browser. I have tried to configure the support package as some people were advising, in comments below, to follow “Add-ons, Manage Add-ons, then to the right of the Embedded Coder package and clicking the Gear for setup”.

You can go to Matlab, Add-ons, Manage Add-ons, then to the right of the Embedded Coder package you click the Gear for setup. Under Hardware Board select TI F281x and Device name set to F2812.

What should be the system target file to generate flash based code? I detected a bug with the block EPM for F28004x autocoding i don't know where to report it.

Hello Venkatesh, When I use Matlab18a and ccs8 (ccs6), there are another problems occurs, I click the button (employ to hardware). Static code metrics report was not successfully generated because of the following errors.

ziya rangarang ehsan divar repetitions aug nov records space
(Source: soundcloud.com)

Hello, I am trying to convert the Simulink file into dsp28379 code, but an error occurs, C:\ti\controlSUITE\device_support\F2837xD\v190\F2837xD_headers\include\F2837xD_device.h 18 “You must define CPU1 or CPU2 in your project properties. Hi Antonin please clear me external mode run steps with using xds100 v2.

In external mode running, we donor use CCS software? I use SCI-A block and set GOP number in my TMS28335 board and select serial mode in configuration parameter but when running program in external mode show some error.

Do you think I must use boot form flash and after running external mode? External mode needs a serial connection with the board.

This will allow you to see the generated code as a project in CCS, put breakpoints, make edits, recompile, etc. For R2016b release, you can load the generated .out in CCS externally and run it on hardware.

Hi, Is it possible to create a CCS project from my Simulink mode? Please refer this link: http://processors.wiki.ti.com/index.php/Using_the_serial_adapter_of_XDS100 In TI XDS100v2 the PORT of the TDI chip is used for PART and COM port corresponding to this port must be configured in Simulink Hardware config pane under external mode entry.

ziya evin ehsan divar records oct artwork
(Source: soundcloud.com)

Ensure the GPO pins over which the SCI_A module connects to TDI chip are properly configured Hardware config pane under SCI_A entr Thank you for your continued interest and deep design questions around our support package.

We are glad to help you out in more effective way through our technical support channel. We encourage customer to use this channel for deeper engagement on the support side which may involve sharing certain artifacts and details that can help us to continue further assisting you with application specific questions.

So I think a good solution would be during the interruption which change the multiport to clear the TX FIFO You need to ensure the SPI clock mode match properly between Arduino NATO and F28335.

Hi, I am working with a F28379D, can I clear all the SPI TX FIFO on an interruption? I am using SPI in slave mode for receiving data from Arduino NATO.

Make sure to use the latest update of the support package (in the MATLAB main window go to Add-ons - Check for Updates - Hardware Support Packages) as we made recent changes to the SPI module. The latest support package updates will provide you the option to select the required data bit selection for Receive block in slave mode.

ziya ehsan divar shayan amirreza khosravi hosseini nov records artwork
(Source: soundcloud.com)

This issue prevents me to use this block to transmit data to number of slaves using one SPI module. On the Simulink interface, I want to modify the pin assignment of a PWM output under certain conditions.

Salut Vincent, Put 7 as the data length in the SPI receive block and implement the logic in Simulink to reconstruct the message of 28 once you hit the interrupt 4 times. While using c2000 embedded coder toolbox, I successfully generate and download C-code to the TMDSCNCD28335 control card using JTAG connector (XDS100 v3).

Hi Vincent, the SPI hardware FIFO can only hold 16 words on high-end devices (F2806x/07x/37x, etc.). Our blocks allow you to specify a higher data length as you can react on the SPI interrupt and read more than 16, but you have to be actively reading while the data is coming as the hardware will not be able to hold more than 16 words.

Make sure to use the latest update of the support package (in the MATLAB main window go to Add-ons - Check for Updates - Hardware Support Packages) as we made recent changes to the SPI module. You can then reconstruct the full message after 4 reads, that would be a robust solution.

Yes Reza, just connect a Scope to the output of an ADC block Follow the steps in the Editor's note on top of this page and let us know if this fixes your problem.

daad ziya ehsan divar feb records
(Source: soundcloud.com)

1) Please ensure the GPO pins are selected properly in the HW config pane that corresponds to board SCI-A module. 2) You may also first consider doing normal SCI Rx and TX with host PC using a tool like putty.

Error occurred while executing External Mode MEX-file 'ext_comm': Failed to connect to the target. Otherwise, click the Build button, which downloads and runs your application on the target.

Component:Simulink | Category:Block diagram error Unable to connect to the 'TI Delphine F2837xD' target for .... I believe I am able to establish connection between Computer and target (as I can deploy the LED blinking code, or any other code and its working), but when I try to run External Mode to check the signals on scope, I got the above mentioned error.

It helped, and now it's okay, the third software sterile circular buffer was not installed. Just put “Inf” as the simulation time to run External mode infinitely.

In R2018a we automatically update the simulation time to “Inf” when you select a TI C2000 target. Hi, By using external mode to perform real time execution, I'm able to deploy the model to hardware and it works... but only for 10 seconds.

ehsan ziya divar sep records
(Source: soundcloud.com)

This will allow you to see the generated code as a project in CCS, put breakpoints, make edits, recompile, etc. This feature was introduced in R2017a, the CCS version used is the one you have specified during the installation of the support package.

Keep in mind that if you recompile the project in CCS, the executable generated by CCS will not overwrite our generated executable and will be in a different folder inside the code generation directory (i.e. CCS_Debug) If this works for you, don't feel obligated to rate us 5 stars, but keep in mind that it would help us put more features like that in the future and that we would greatly appreciate it ;-) I'm copying the comment I posted on Jan 25th to answer your question: The target audience for this support package mostly contains professional engineers among which the usage of Mac is close to 0.

It gives error “The support package is not compatible with your version of MATLAB or operating system”. Hi Venkatesh, Antonin,Smith I am grateful for the kind solutions presented.

After you have run the Model Advisor, please ensure the target is F28335 once in the hardware configuration pane. R2016b users, it appears that one third party tool (Ostermiller circular buffer) is now redirecting to a secured server that uses a certificate that the default R2016b MATLAB installation doesn't have.

This leads to installation errors where you see a pop-up advising you to call technical support. You should upgrade your model to ERT. Tlc workflow as mentioned in the error message you got.

(Source: www.zya.cc)

You should open Upgrade Advisor (AnalysisModel AdvisorUpgrade Advisor) and run the check “Check and update embedded target model to use ERT. Tlc system target file” as mentioned in the error message. The problem can be better present in other form, so I described it in the following link.

Failed to install third-party software : Ostermiller circular buffer. Hi EU, supporting a generic solution for CSP is hard because the way you use it heavily depends on the application.

Can you try code generation at some other non Windows system specific path? I have installed MATLAB 2017b, CCS 7.3.0 and C2000 Ware from control suit.

### Creating HTML report file untitled_codegen_rpt.html ### Build procedure for model: 'untitled' aborted due to an error. Error(s) encountered while building “untitled”: ### Failed to generate all binary outputs.

Please note: For F28335 ends board, the USB emulation does not support serial operation, but only JTAG. Hence, along with USB that is used to download the program, user also needs to connect a serial cable from the DB9 connector(SCI-A) on the board to the PC COM port to run the external mode.

ziya ehsan divar aug records artwork
(Source: soundcloud.com)

Please ensure the GPO pins are selected properly in the HW config pane that corresponds to board SCI-A module. You may also first consider doing normal SCI Rx and TX with host PC using a tool like putty.

Error occurred while executing External Mode MEX-file 'ext_comm': Failed to connect to the target. Otherwise, click the Build button, which downloads and runs your application on the target.

Component:Simulink | Category:Block diagram error Unable to connect to the 'TI Delphine F2833x (boot from flash)' target for 'untitled'. Hello, I cannot handle this error: The path 'ostermillerutils-1.08.02' does not exist I know that is because of third part failure installation of Embedded Coder Support Package for Texas Instruments C2000 Processors.

From the error message we suspect that you have space in the path of an artifact which DSS is try to fetch. So, could you please try to use the command RTW.transformPaths('PATH') and provide the full path for the artifact that DSS is looking in the above command by replacing PATH and see if the resulting string comes out with a space or not.

In R2017b, we added an automatic download of the TI compiler to make the installation easier. Unfortunately, incompatibilities with server configurations created multiple cases where the support package installation would fail with the following message: “Failed to download the third-party software: TI C2000 Code Generation Tools” This issue is resolved now, sorry for the inconvenience.

(Source: rap-3da.biz)

Warning: build attribute vendor section TI missing in “C:/Programmatic/MATLAB/SupportPackages/R2017a/toolbox/target/support packages /tic2000/rt lib/IQ math_fpu32.lib”: compatibility cannot be determined warning: build attribute vendor section TI missing in “C:/Programmatic/MATLAB/SupportPackages/R2017a/toolbox/target/support packages /tic2000/rt lib/IQ math_fpu32.lib”: compatibility cannot be determined warning: build attribute vendor section TI missing in “C:/Programmatic/MATLAB/SupportPackages/R2017a/toolbox/target/support packages /tic2000/rt lib/IQ math_fpu32.lib”: compatibility cannot be determined warning: build attribute vendor section TI missing in “C:/Programmatic/MATLAB/SupportPackages/R2017a/toolbox/target/support packages /tic2000/rt lib/IQ math_fpu32.lib”: compatibility cannot be determined “### Created: ./c28069pmsmfocdual.out” “### Invoking postbuild tool “Hex Converter” on “./c28069pmsmfocdual.out”...” C:/ti/ccsv7/tools/compiler/TI-CGT~1.6/bin/hex2000 -i “./c28069pmsmfocdual.out” -o “./c28069pmsmfocdual.hex” -order MS -romwidth 16 -q “### Done Invoking postbuild tool “Hex Converter” ...” “### Successfully generated all binary outputs.” C:\ti\ccsv7\tools\compiler\ti-cgt-c2000_6.4.6\c28069pmsmfocdual_ERT_RTW>exit /B 0 Downloading program to the target hardware... ### Build procedure for model: 'c28069pmsmfocdual' aborted due to an error.

It always said that “Failed to download the third-party software: TI C2000 Code Generation Tools” and stopped my installation. “Your current working folder is: C:\Program Files\MATLAB\R2017a\bin Simulink does not permit you to modify the MATLAB installation area.

Please change to a working folder that is not in the MATLAB installation area and re-try the previous command.'” The example you are referring to was first released as a file exchange entry based on R2016b.

Hi Antonin, When I run the check for embedded target model, I am getting this message: Failed This model was not updated to use ERT. Tlc system target file.

You are opening a Simulink model that has been saved with an earlier version of MATLAB. Just follow the instructions that are provided to you (i.e. Open the Upgrade Advisor and run the check “Check and update embedded target model to use ERT. Tlc system target file to upgrade the model to the supported workflow).

flowers
(Source: flowers.zya.cc)

Once you complete the step and save the model, you won't see this message again. Caused by: The model is configured to use a hardware board that has changed significantly since the release of MATLAB in which it was originally saved.

Open the Upgrade Advisor and run the check “Check and update embedded target model to use ERT. Tlc system target file” to upgrade the model to the supported workflow. Hi Gerhard, Sad to see your 1-star rating, it would be good to provide feedback we can react to.

You can use the data type replacement feature under code generation tab. This “float64” is alias for long double which is already typecast in the device header included in code gen.

>> float64 = Simulink. AliasType; >> float64. HeaderFile = 'F2806x_Device.h'; // you can specify your choice of device specific file here... >> float64. BaseType = 'double' In the generated code all double variables in Simulink will now represent long double in generated code which is 64bit float. The alias name float64 is what is visible in generated code.

Hello I met a problem when I used the software to generate CCS project. Then I found profile_timer.c in the root c/Matlab/...........tic2000/src(not quite accurate) and the code_profiling_utility_functions.c in the folder named instrumented.

(Source: soundcloud.com)

The April release of the support package, on both R2016b and R2017a should fix the problem you are describing. You will find a link at the bottom of the diagnostic viewer, after you generate code, which opens a CCS project that you can debug, modify, rebuild, reload, etc.

* I2C and SPI blocks for F28x7x devices with examples including reading sensors from the BOOSTXL-SENSORS Booster Pack. * Multitasking profiling, this first version of the tool doesn't support interrupts but allows you to measure synchronous task execution time and visualize preemption.

This is obviously non-exhaustive, and you will find plenty of other enhancements in addition to all the mainstream features that you will get with R2017a. We are working on a fix that we will publish in the next release of the support package.

We could give you a patch via Tech Support in the meantime, feel free to contact us. I have been developing a decoupling control for two motors using Simulink and TI Delphine F28377xS.

After updating the support packages from version 16.2.3 to 16.2.5 (the latest) I'm cannot choose anymore the setting “Default Parameter behavior as Inclined and select some Parameters as Tunable using Batch Download. Hi, I have installed the latest version but can't find the examples in the library browser anymore.

tehran ziya ehsan guest special night soundcloud deep
(Source: soundcloud.com)

In 16b, we added drastic improvements to serial External mode. You can increase the baud rate of the serial over USB of your Launchpad or controlled.

On Launchpads and recent controllers using TDI 2232H, you can pick any baud rates below or equal to 6Mbps, or exactly 9 or 12Mbps. Increase your CIA baud rate in the configuration parameters to take advantage of this enhanced feature.

I have doped out a solution to the problem successful this timeout was something wrong to log in last time maybe Hi Paola, We rely on peripheral header files shipped by TI.

Historically we were shipping some of these files, we now rely on the installation of ControlSuite which is a more sustainable approach for the long term. I understand that this is an extra burden on your side to download ControlSuite and point to the installation folder.

The files are needed to access peripherals like ADC, PWM, I2C, SPI, etc. For R2013a and earlier, the TI C2000 Target is provided directly with your Embedded Coder installation and does not require a separate Support Package download.

ziya ehsan akesson shtuff
(Source: flipboard.com)

Other Articles You Might Be Interested In

01: Dahil Sayo Best Zumba Dance
02: Dance Shoes For Zumba Uk
03: Dance Trainers For Zumba Uk
04: Dark Wizard Quest Lineage 2
05: Dark Wizard Quest Mu Online
06: Darrin Zombro
07: Darwin In X-men First Class
08: David Zumbro
09: Dayz Where Are The Zombies
10: Da Share Zone You Can Leave
Sources
1 dasharez0ne.com - https://dasharez0ne.com/
2 en.wikipedia.org - https://en.wikipedia.org/wiki/Da_share_z0ne