This simply means that the sliding frame that allows the recliner to lean backwards and forwards is broken or has faulty parts. Fortunately, this is also the easiest fix you as you can either realign the frame or replace the broken parts.
This is not caused by wear and tear, but is the result of poorly implemented design or engineering from the manufacturer. The good news is that poor manufacturing can be directly felt the moment you sit in the recliner for the first time.
With this, you can have the recliner replaced (if the warranty is still in effect) or do some minor repairs yourself to strengthen the frame by removing the upholstery. If one peg is more elevated or lowered, this will affect weight distribution which puts considerable strain on the frame.
Repairs and replacements are possible, but it is highly recommended that you relocate the recliner so that it can stand on an even surface. You will immediately notice it once the recliner starts emitting creaking noises whenever you sit down.
This is more of a cosmetic problem than a structural one, but it might give you the wrong impression that your recliner is broken. You can easily buy these at a local hardware, but you might already have some at home if you're handy with some minor fixes.
It comes mostly as a set of drivers meant for using to unlock screws with varying heads and sizes. Loosen the screws locking the wooden panel below, as well as the footrest (depending on the affected area).
You must also wipe away excess oil and constantly check if the frame still squeaks whenever you move it. If the wooden panels are broken, you can apply wood glue over the area and provide support by installing metal bracing.
Once you have fixed your leaning recliner, the rest of the process will involve checking it for any issues, here and there. When you have the tools and knowledge on how to fix a recliner that leans to one side, you can then handle any repairs that need to be addressed.
It is mainly involves checking for loosened screws, weakened mechanisms, and cracks in the frame. It is the best place where you can fall asleep, watch a TV show, read a book with ease or even cuddle your pet.
Should it happen that your recliner suffers some form of damage due to over-use, do not toss it away. You may decide to give a reputable furniture technician a call to come and help you with this.
But, if you are the DIY kind of person, roll up your sleeves and get on with the repair! Here are 7 key tips on how to fix a recliner chair mechanism.
If you are looking to repair your Recliner Chair Leather or Vinyl, check this: You need a few minutes of your time and the right equipment to have the problem fixed.
Use your flashlight to locate the four bolts that hold the spring in place. Detach the spring from the recliner and place it on the floor, right side facing up.
Using the wrench, remove the bolts that hold the footrest to the spring. For the backs with locking levers, see to it that the brackets on the sides are well fixed.
You can remove the bracket fasteners and tighten them to make the back more firm. Use a flat screwdriver to ensure that the tab is well-placed in its slot after the back is fitted on.
Refasten by ensuring that the bolts tightly hold the back onto the seat posts. Refer to the videos below for a demonstration on how to fix a recliner chair back.
Before you tighten the cable stop, ensure that it is held in place against the piston bracket. Unscrew the four bolts on the footrest, and the two that hold the squab to the frame.
A missing or broken handle can make the recliner to malfunction. All you need is a new, replacement handle, the right tools and some bit of time.
If the footrest is open, press or push it into a closed position. Remove it using a wrench or a screwdriver, whichever is appropriate Detach the old handle from the recliner.
Put the retaining screw into the new pull handle and fasten it. Footrests malfunction because they are stuck, refuse to lock properly or won’t stay up.
If you realize damages of this nature to the footrest, please follow these steps to repair it. First, flip the recliner over so that you can have access to the underside where the screws are located.
Longer screws will get into the wood and hold the footrest more firmly in place. If your footrest won’t move and is stuck in a certain position, you will need to use a lubricant to get it working again.
To do this, flip the recliner over and loosen the screws attached to the frame at the bottom of the footrest. To loosen a footrest that is stuck and requires some adjusting, again turn the recliner over.
Two types of mechanisms are responsible for the reclining mode of the chair. To solve this problem, follow these simple steps to fix a recliner that won’t close.
Tighten the nut and bolt that holds the lever in place. The above adjustments should make the reclining feature of the chair work as it is meant to.
Refer to the videos below for a demonstration on how to solve the problem of a recliner that won’t close. If the springs mount on wood and the screw holes are oversized, use the wood glue as a filler to make the holes smaller.
If the springs mount on metal, tighten any loose attachments. The following video shows how you can fix a recliner that leans to one side.
All you need is to equip yourself with the right information on how to fix a recliner chair mechanism. In fact, you will save a lot of money on costs if you decide to do the job yourself.
You do not have to engage the services of a repairman any time a recliner problem pops up. Frequently check for cracks in the frame and weakened mechanisms.
Yet, if you still find difficulties with the recliner, call a repair person. My building is fairly old and because all things start to give out with old age, the floors are warped pretty much everywhere.
Some used matchbooks as shims, (the definitive word, I discovered recently, for what’s put under an uneven furniture leg) while others used tiny stacks of books or coasters, and most shockingly, some used empty tuna cans. I for one, used to opt for those little pads you put under chairs, so they don’t scuff your wood floors.
That ended when I woke up one night to find my dog had slipped them from under the furniture and was shredding them to bits. Thankfully, I found a few other shims that work great, and aren’t empty cans of tuna.
They also have grip on them like the bottom of a winter boot to ensure they don’t slide and that your furniture doesn’t either. You need to drill into your furniture to use them, but once you do, you can adjust how high each leveler goes to account for your warped floor.